HW-131 is a buck converter on a special breakout board designed for MB102 breadboards (the most common type).
It plugs directly into the breadboard power rails which coincidentally tightly secures the power supply to the breadboard.
Power Inputs
The board accepts input power via a cinch power socket (6.5-12V).
Output Power
A large latched push button can be used to turn output power on and off. When the power is turned on, a green LED lights up.
The board converts the input voltage to 3.3V and 5V simultaneously.
Both voltages are available via 2x2 pins next to the power button.
5V is also available via a USB-A connector.
The buck converter on the board is rated for a maximum output current of 700mA. This power supply is well suited for most prototyping. If your circuit requires unusually high currents, definitely use a different power supply.
Setting Rail Output Voltage
The voltage that is supplied to the breadboard rail can be flexibly set using jumpers on each side/on each rail sepately.
You can set the voltage to identical values on both breadboard rails, or you can set 5V to one rail and 3.3V to the other rail. If you remove the jumper, the rail is not receiving any power.
Connecting Breadboard Rails
The output power that you set through the two sets of jumpers is available at pins on the board backside.
These pins directly plug into the breadboard power rails:
Make sure you place the power module on the correct side of the breadboard so that + and - align correctly to the power rails:
The pins marked + should plug into the rail marked with the red line, and the pins marked - need to go into the pins marked with the blue line.
Slow Website?
This website is very fast, and pages should appear instantly. If this site is slow for you, then your routing may be messed up, and this issue does not only affect done.land, but potentially a few other websites and downloads as well. Here are simple steps to speed up your Internet experience and fix issues with slow websites and downloads..
Comments
Please do leave comments below. I am using utteran.ce, an open-source and ad-free light-weight commenting system.
Here is how your comments are stored
Whenever you leave a comment, a new github issue is created on your behalf.
-
All comments become trackable issues in the Github Issues section, and I (and you) can follow up on them.
-
There is no third-party provider, no disrupting ads, and everything remains transparent inside github.
Github Users Yes, Spammers No
To keep spammers out and comments attributable, all you do is log in using your (free) github account and grant utteranc.es the permission to submit issues on your behalf.
If you don’t have a github account yet, go get yourself one - it’s free and simple.
If for any reason you do not feel comfortable with letting the commenting system submit issues for you, then visit Github Issues directly, i.e. by clicking the red button Submit Issue at the bottom of each page, and submit your issue manually. You control everything.
Discussions
For chit-chat and quick questions, feel free to visit and participate in Discussions. They work much like classic forums or bulletin boards. Just keep in mind: your valued input isn’t equally well trackable there.
(content created Apr 20, 2024)